TM-9-2350-277-34 Direct and General Maintenance Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 343 of 820
TM 9-2350-277-34 REPAIR HOPPER HATCH HINGE (M58 ONLY) — Continued 0049 00 4. Bend four retaining strips (1) up, and remove rubber seal (2) from hatch (3). INSTALLATION NOTE All weld joints should be metal to metal fit. In no case should weld gap exceed 3/32 inch or one half the thickness of thinner member, whichever is less. 1. Clamp or tack weld new hinge (4) or (5) on hatch (3). Make sure hinges are alined and spaced as shown. 0049 00-3