TM-9-2350-277-34 Direct and General Maintenance Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 299 of 820
TM 9-2350-277-34 REPAIR TRACK TENSION ADJUSTER — Continued 0037 00 INSTALLATION 1. Press new sleeve bearing (14) in piston (3) from side opposite lubrication fitting (9). Use arbor press. 2. Press new sleeve bearing (15) in plunger (2). Use arbor press. NOTE Packings, bearings, and retaining rings are part of repair kit P/N 5703829. 3. Install five new packings (13), new bearing (12), and new retaining ring (11) on piston assembly (10). 4. Apply a light coat of engine oil to piston assembly (10) and to inside of piston (3). 0037 00-5