TM-9-2350-277-34 Direct and General Maintenance Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 298 of 820
TM 9-2350-277-34 REPAIR TRACK TENSION ADJUSTER — Continued 0037 00 INSPECTION-ACCEPTANCE AND REJECTION CRITERIA INSPECT AND REPAIR 1. Check threads of plunger (2) and piston (3). Chase damaged threads with a die. Replace parts as a matched set if the threads of either part are stripped or worn. 2. Check machined surfaces of piston (3) and plunger (2). Remove grooves and scratches. Replace parts that have deep grooves and scratches or are worn. 3. Check parts shown in table on page 0037 00–7 that have reference letters. 4. Check the parts dimensions with table on page 0037 00–7 to determine replacement. 0037 00-4