TM-9-2350-277-34 Direct and General Maintenance Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 254 of 820
TM 9-2350-277-34 REPLACE FRONT MAIN WIRING HARNESS — Continued 0030 00 24. Slide two new lockwashers (8), under front mount plate (1) on hull weld nuts. Place two new lockwashers (7) on mount plate (1) over holes. Secure with two screws (6). 25. Tighten two rear screws (4). 26. From inside of power plant compartment, place harness (4) on driver’s bulkhead. Secure with three clamps (3), new lockwashers (2), and screws (1). 27. Connect circuit 452 lead (9) to front bilge pump (10). 0030 00-26 23. Slide mount plate (1) between two lower lockwashers (2), two upper lockwashers (3), and screws (4) of voltage regulator (5). Change 1