TM-9-2350-277-34 Direct and General Maintenance Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 173 of 820
TM 9-2350-277-34 REPLACE VARIABLE SPEED DRIVE ASSEMBLY ADAPTER — Continued 0016 00 WARNING Engine could start and injure you. Stay clear of possible moving parts. NOTE Ensure FUEL SHUTOFF handle is in OFF position. Engine could start during performance of Step 6. 5. Have helper use 1 1/2 socket and 3/4 inch drive breaker bar on cam nut (1) to prevent engine from turning over in Step 6. 6. Loosen retainer screw (5) four complete turns. Use 3/4 inch drive breaker bar. Install puller and three 1/4-28 UNF screws. Install three screws and washers into rear hub (6). Break loose front cone (7) from seated position. Remove puller and three screws. Unscrew retainer screw (5), remove washer (8), and front cone (7). 0016 00-3