TM-9-2350-277-34 Direct and General Maintenance Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 158 of 820
TM 9-2350-277-34 REPLACE ENGINE — Continued 0015 00 32. Install circuit leads 74D (18), 74C (19), and 74A (20) to solenoid battery terminals (21) and (22) and starter (23) with three nuts (24) and new lockwashers (25). 33. Install bracket (1) with screw (2) and washer (3) on engine. TIGHTEN SCREW TO 30-35 LB-FT (41-48 N·m) TORQUE. 34. Position oil sample valve (4) on bracket (5) and secure with jam nut (6). 35. Install elbow (7) and nipple (8) on engine. 36. Install low oil pressure switch (9), tee (10) and two adapters (11) and (12) on elbow (7). 37. Install clamp (13) on low oil pressure switch (9) and secure to bracket (1) with two washers (14), nut (15), and screw (16). 38. Connect hose (17) to adapter (18) on oil sample valve (4) and to adapter (12) on tee (10). 39. Install elbow (8) on primary fuel filter (9). 0015 00-30 Change 2