TM-9-2350-277-34 Direct and General Maintenance Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 155 of 820
TM 9-2350-277-34 REPLACE ENGINE — Continued 0015 00 22. Connect ramp to tank hose (13) to elbow (14) on hydraulic tank (4). 23. Secure two hoses (11) and (13) with four new straps (15). NOTE Do not tighten generator mounting bracket screws until all the mounting screws have been installed. All three screws require a specific torque. 24. Position generator mounting bracket (16) and install washer (17) and screw (18). TORQUE SCREW TO 32-34 LB-FT (43-46 N·m). 25. Align generator mounting bracket (16) holes. Install washer (19) and screw (20). TORQUE SCREW TO 36-38 LB-FT (49-52 N·m). 26. Align generator mounting bracket (16) holes. Install washer (21) and screw (22). TORQUE SCREW TO 32-34 LB-FT (43-46 N·m). 0015 00-27 Change 2