TM-9-2350-277-34 Direct and General Maintenance Manual M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 149 of 820
TM 9-2350-277-34 REPLACE ENGINE — Continued 0015 00 INSTALLATION WARNING Hydraulic fluid is poisonous and can be absorbed through your skin. Wash off any hydraulic fluid which contacts your skin. Read the hydraulic fluid warning in the front of this manual. 1. Install new hydraulic pump (6) and new gasket (7) on engine adapter. Secure with two screws (8) and washers (9). TIGHTEN SCREWS TO 25-30 LB-FT (34-41 N·m). 2. Remove new engine from shipping container and place new engine on engine and transmission stand. Use sling and lifting device. 3. Place and secure old engine in shipping container. C A U T I O N Damage to engine will result if crankshaft endplay is not complied with. Engines require a crankshaft endplay of not less than 0.004 inch (0.102 mm) nor more than 0.016 inch (0.406 mm) with new parts or 0.018 inch (0.457 mm) with used parts. NOTE The crankshaft endplay inspection must be completed without the transmission or front crankshaft pulley installed. 4. Measure crankshaft endplay. 0015 00-21 Change 2