TM-9-2350-277-20-6 Unit Maintenance Manual Volume 6 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 447 of 722
TM 9-2350-277-20-6 REPLACE CHEMICAL ALARM M43 UNIT INTERFACE WIRING HARNESSES (M113A3 ONLY) — Continued 0923 00 6. Install insulator washer (11), flat washer (10), lockwasher (9), nut (8), bushing (7), retainer (6), spring tension washer (5) and coupling nut (4) on harness (12). 7. Install four backshells (2) and C-clip retainers (1) on leads (3). 8. Attach wiring harness (13) to bracket (14) with four screws (15) and new locknuts (16). 9. Attach four leads (3) to leads (17) as follows: 509E to 509G 509F to 509H 6D POS to 6E POS 7D NEG to 7E NEG 10. Install bracket (14) on vehicle with four screws (18) and washers (19). FOLLOW-THROUGH STEPS 1. Connect battery ground strap (WP 0337 00). 2. Start engine (see your -10). 3. Raise and lock ramp (see your -10). 4. Stop engine (see your -10). END OF TASK 0923 00-7/8 blank