TM-9-2350-277-20-6 Unit Maintenance Manual Volume 6 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 407 of 722
TM 9-2350-277-20-6 INSTALL/REMOVE CHEMICAL AGENT AUTOMATIC ALARM KIT (M113A3 ONLY) 0918 00 THIS WORK PACKAGE COVERS: Installation (page 0918 00-1). Removal (page 0918 00-8). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit WP 0926 00, Item 65 M a t e r i a l s / P a r t s Locknut (2) Locknut (4) Locknut (4) Lockwasher Lockwasher P e r s o n n e l R e q u i r e d Unit Mechanic Helper R e f e r e n c e s See your -10 TM 3-6665-225-12 TM 3-6665-273-20 E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) Ramp lowered (see your -10) Battery ground strap disconnected (WP 0337 00) INSTALLATION NOTE Check Alarm Kit before starting installation. Be sure Alarm Kit is complete. Install kit in right rear and left side center of troop compartment. Move spall liners, as required, to access mounting areas. 1. Install chemical alarm refill tray bracket (WP 0922 00). 2. Install chemical alarm spare battery bracket (WP 0921 00). 3. Install M182 mounting bracket (1). Use four screws (2), washers (3), and locknuts (4) on spall liner behind driver’s seat. 0918 00-1