TM-9-2350-277-20-6 Unit Maintenance Manual Volume 6 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 349 of 722
TM 9-2350-277-20-6 REPLACE FIRE EXTINGUISHER AND MOUNT (M1059A3 ONLY) — Continued 0896 00 INSPECTION-ACCEPTANCE AND REJECTION CRITERIA 1. Inspect fire extinguisher trigger seal (11) and cap indicator (12). If cap indicator is extended or seal wire is broken, notify supervisor. INSTALLATION 1. Install lanyard (10) with pin (1) attached on strap (2) with screw (7), washer (8), and new locknut (9). 2. Install mount (6) on hull. Secure with four screws (4) and washers (5). 3. Place fire extinguisher in mount (6). Secure with strap (2). 4. Install pin (1) in strap (2). END OF TASK 0896 00-3/4 blank