TM-9-2350-277-20-6 Unit Maintenance Manual Volume 6 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 231 of 722
TM 9-2350-277-20-6 REPLACE DRIVER’S DISPLAY MOUNTING BRACKET (DVE) (M58 ONLY) — Continued 0866 02 5. Remove three screws (6), lockwashers (5), clamps (4), guide (2), and three pads (3) from bulkhead. Discard lockwashers. 6. If commander’s display is not installed in vehicle, remove connector W2P2 (4) from connector A1J2 (5) and connector 516B P2(3) from connector A1J1 (2) on driver’s display (1). 7. While holding driver’s display (2), remove four knobs (3) and driver’s display (2) from bracket (1). POWER VIDEO DISPLAY BRIGHTNESS POLARITY SENSOR LEVEL GAIN AUTO AUTO WHT-HOT BLK-HOT EXIT SENSOR ON OFF 0866 02-3 Change 1