TM-9-2350-277-20-6 Unit Maintenance Manual Volume 6 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 210 of 722
TM 9-2350-277-20-6 REPAIR SPEEDOMETER CABLE — Continued 0861 00 INSPECTION-ACCEPTANCE AND REJECTION CRITERIA 1. Inspect cable housing. If damaged, replace complete cable assembly (WP 0860 00). INSTALLATION 1. Coat cable core (4) with grease. 2. Push new cable core (4) into cable housing (5). 3. Install new gasket (1) and flat washer (2) in cable housing (5). 4. Install slotted washer (3) on cable core (4) at final drive adapter end. 5. Connect speedometer cable to final drive adapter and speedometer (WP 0860 00). FOLLOW-THROUGH STEPS 1. Install speedometer cable (WP 0860 00). 2. Install hull front access cover (WP 0449 00). 3. Close power plant access door (see your -10). 4. Raise trim vane (see your -10). END OF TASK 0861 00-2