TM-9-2350-277-20-6 Unit Maintenance Manual Volume 6 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 124 of 722
TM 9-2350-277-20-6 REPLACE INVERTER DC CABLE (W6) (M1068A3 ONLY) — Continued 0840 00 2. Remove face plate (3) on inverter housing A2 (4) by removing 10 screws (5) and lockwashers (6). Discard lockwashers. 3. Disconnect harness W6 terminal E2 (7) from terminal block TB1 (8) on inverter housing faceplate (3). NOTE Ground post is located on hull wall between power control box A1 and driver’s station. 4. Disconnect harness W6 terminal E1 (9) from ground post G3 (10). Remove screw (11) and lockwasher (12). Discard lockwasher. 5. Remove harness from carrier. 0840 00-2