TM-9-2350-277-20-5 Unit Maintenance Manual Volume 5 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 746 of 928
TM 9-2350-277-20-5 REPLACE M14 NBC CABLES AND SWITCH ASSEMBLY (M1059A3 ONLY) — Continued 0799 00 5. Install clamps (6) on circuit 579A cable (1). Secure clamps (6) to bulkhead with two screws (7) and new lockwashers (5). 6. Install circuit 579A cable (1) along existing wiring harness on side plate. Secure cable (1) to harness with three new straps (9). 7. Align circuit breaker and switch assembly (1) to threaded inserts under left side of traverse beam, with controls facing front of vehicle. Secure with two screws (2) and new lockwashers (3). Do not tighten screws. 8. Install circuit 579A lead (4) on jack (5) of circuit breaker (6). 9. Install short cable assembly (7) on jack (8) of circuit breaker (6) and jack (9) of switch (10). 10. Install power cable assembly (11) on jack (12) of switch (10). 11. Install slots on cover (13) under two screws (2) securing switch assembly (1) to traverse beam. 0799 00-4