TM-9-2350-277-20-5 Unit Maintenance Manual Volume 5 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 691 of 928
TM 9-2350-277-20-5 REPLACE M13 NBC HEATER HOSES (M1068A3 ONLY) — Continued 0790 00 INSTALLATION 1. Install rear operator’s inlet hose (14) and two clamps (18) on rear operator’s heater (4) and manifold (19). Tighten clamps. 2. Install two clamps (17) on rear operator’s inlet hose (14) Secure clamps on sponson with two screws (15) and new lockwashers (16). 3. Secure electrical leads to rear operator’s inlet hose (14) with new straps (13). 4. If bracket (9) was removed, install bracket on table supports with four screws (10), washers (11), and new lockwashers (12). 5. If either bracket (5) was removed, install bracket (5) on bracket (9) with two screws (6), washers (7), new lockwashers (20), and nuts (8). 6. Install rear operator’s outlet hose (2) and two clamps (1) on connector (3) and rear operator’s heater (4). Tighten clamps. 0790 00-5