TM-9-2350-277-20-5 Unit Maintenance Manual Volume 5 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 593 of 928
TM 9-2350-277-20-5 REPLACE SMOKE GENERATOR GLOW PLUG CABLE ASSEMBLIES (M1059A3 ONLY) — Continued 0772 00 NOTE There are two exterior cables, access plates, and smoke generators, left and right. Cables are removed from vehicle the same way. Only one exterior cable, access plate, and smoke generator is shown. Remove cables as required. 3. Disconnect exterior cable (5) from interior cable (4) in left access plate (6). 4. Disconnect exterior cable (5) from preheat harness jack (7) on panel (8) of left smoke generator (9). 5. Remove screw (1), lockwasher (2), and clamp (3), and interior cable (4) from right side of hull. Discard lockwashers. 6. Disconnect exterior cable (5) from interior cable (4) in right access plate (6). 7. Disconnect exterior cable (5) from preheat harness jack (7) on panel (8) of right smoke generator (9). 8. Remove four screws (10), locknuts (11), and interior cable (4) from right access plate (6). Discard locknuts. 9. Remove four screws (10), locknuts (11), and interior cable (4) from left access plate (6). Discard locknuts. 0772 00-3