TM-9-2350-277-20-5 Unit Maintenance Manual Volume 5 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 566 of 928
TM 9-2350-277-20-5 REPLACE SMOKE GENERATOR FUEL LINES AND GUARDS (M1059A3 ONLY) — Continued 0765 00 NOTE Removing fuel line guard (4) will also loosen electrical line guard (5). Electrical line guard should be held in place and not removed. Follow Step 2 below. 2. Remove four screws (1), lockwashers (2), washers (3) and two fuel line guards (4) on fuel tanks. Discard lockwashers. 3. To hold electrical line guard (5) in place, reinstall, but do not completely tighten, four screws (1) and washers (3) into electrical line guards. 4. On left side of carrier, remove four screws (6), lockwashers (7), and ten clamps (8) from fuel lines. Discard lockwashers. 5. On right side of carrier, remove five screws (9), lockwashers (10), and ten clamps (11) from fuel lines. Discard lockwashers. 0765 00-2