TM-9-2350-277-20-5 Unit Maintenance Manual Volume 5 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 553 of 928
TM 9-2350-277-20-5 REPLACE AIR COMPRESSOR ASSEMBLY (M1059A3 ONLY) 0762 00 THIS WORK PACKAGE COVERS: Removal (page 0762 00-1). Installation (page 0762 00-3). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0926 00, Item 65) Socket Wrench Set (WP 0926 00, Item 72) Torque Wrench (WP 0926 00, Item 81) M a t e r i a l s / P a r t s Lockwasher (8) P e r s o n n e l R e q u i r e d Signal Support System Specialist 31U10 Helper (2) R e f e r e n c e s See your -10 TM 3-1040-283-10 TM 3-1040-283-20&P E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) Ramp lowered (see your -10) Circuit breaker CB1 OFF (TM 3-1040-283-10) Battery ground strap disconnected (WP 0337 00) Air pressure released from compressor reservoir (TM 3-1040-283-20&P) REMOVAL WARNING Before you do any maintenance, discharge all capacitors to ground or electrical shock could injure personnel. 1. Disconnect air compressor electrical cable assembly (1) from compressor cable assembly connector (2). WARNING Compressed air pressure from smoke generator can cause serious injury or death. To avoid accidents, bleed air before working on air compressor assembly or disconnecting any air hose. 2. Disconnect two air lines (3) from two compressor air reservoir fittings (4). Install safety caps (5) on lines and dust covers (6) on fittings. 0762 00-1