TM-9-2350-277-20-5 Unit Maintenance Manual Volume 5 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 533 of 928
TM 9-2350-277-20-5 REPLACE SMOKE GENERATOR SYSTEM POWER SUPPLY CABLE ASSEMBLY (M1059A3 ONLY) 0757 00 THIS WORK PACKAGE COVERS: Removal (page 0757 00-1). Installation (page 0757 00-2). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0926 00, Item 65) M a t e r i a l s / P a r t s Grommet Locknut Lockwasher Lockwasher (8) P e r s o n n e l R e q u i r e d Signal Support System Specialist 31U10 R e f e r e n c e s See your -10 TM 3-1040-283-10 E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) Circuit breaker CB1 OFF (TM 3-1040-283-10) Battery ground strap disconnected (WP 0337 00) NOTE Before you do any maintenance, discharge all capacitors to ground. REMOVAL 1. Disconnect cable assembly (1) from control panel assembly connector 1J1 (2). 2. Remove screw (3), two washers (4), lockwasher (5), locknut (6), and ground lead (7) from hull bracket. Discard lockwasher and locknut. 3. Remove screw (8), nut (9), and cable assembly (1) from positive battery terminal (10). 4. Remove cable assembly (1) and grommet (11) from battery box (12). Discard grommet. 5. Remove six screws (13), lockwashers (14), and 12 clamps (15) from cable assembly (16). Discard lockwashers. 0757 00-1