TM-9-2350-277-20-5 Unit Maintenance Manual Volume 5 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 518 of 928
TM 9-2350-277-20-5 REPLACE FOG OIL TANK MODULE (M1059A3 ONLY) — Continued 0753 00 INSTALLATION 1. Using a suitable lifting device, raise fog oil tank module (1) from ground to ramp. 2. Remove two dust covers (2) from two quick disconnect couplings (3). NOTE Slide fog oil tank all the way to the left side of carrier to clear air compressor for installation of tank in carrier. 3. Slide fog oil tank module (1) on to hull cross members. Have helper assist. Secure to hull with six screws (4) and washers (5). 4. Remove two safety caps (6) from two fog oil hoses (7). 5. Connect two fog oil hoses (7) to two quick disconnect couplings (3). 6. Connect cable assembly (8) to fog oil pump electrical cable assembly (9). 7. Install breather hose (10) on fog oil tank (11). FOLLOW-THROUGH STEPS 1. Connect battery ground strap (WP 0337 00). 2. Set circuit breaker CB1 to ON (TM 3-1040-283-10). 3. Service fog oil tank as required (TM 3-1040-283-20&P). 4. Start engine (see your -10). 5. Raise and lock ramp (see your -10). 6. Stop engine (see your -10). END OF TASK 0753 00-4