Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2350-277-20-5 Unit Maintenance Manual Volume 5 M113A3 M577A3 M1064A3 M1068A3 M58 Download

Page 444 of 928

TM 9-2350-277-20-5 INITIAL INSTALLATION OF LITTER KIT (M113A3 ONLY) — Continued 0741 00 NOTE Spall liners must be returned to stock or stored for future use. All four mounting brackets, posts, and chain assemblies are installed in the same way. 1. Install upper post pin (1) and lockwasher (2) into hull ceiling. NOTE Locate mounting brackets in the forward two and rearmost two position. 2. Install four mounting brackets (6)on sponson and secure with two washers (7), screws (8), lockwasher (10)and screw (9). 0741 00-2 3. Place top of post (5) under pin (1). Lift post as far as it will go. 4. Lower bottom of post (5) into mounting bracket (6). 5. Install retainer pin (4) in post (5). Turn pin down. 6. Install spring pin (3) into end of retainer pin (4) and secure. Change 1