TM-9-2350-277-20-5 Unit Maintenance Manual Volume 5 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 385 of 928
TM 9-2350-277-20-5 ADJUST FLAME DETECTOR SWITCH 0727 00 THIS WORK PACKAGE COVERS: Adjustment (page 0727 00-1). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0926 00, Item 65) M a t e r i a l s / P a r t s Sealing compound (WP 0928 00, Item 56) P e r s o n n e l R e q u i r e d Unit Mechanic E q u i p m e n t C o n d i t i o n Flame detector switch removed (WP 0734 00) ADJUSTMENT 1. Loosen mounting screws (1). 2. Back off adjusting screw (2) until switch (3) clicks. 3. Turn screw (2) slowly in until switch (3) just clicks. Then turn screw exactly 3/4 turn past the click point. 4. Tighten mounting screws (1). 5. Cement screw (2) to mount (4) with sealing compound. FOLLOW-THROUGH STEPS 1. Install flame detector switch (WP 0734 00). END OF TASK 0727 00-1/2 blank