TM-9-2350-277-20-5 Unit Maintenance Manual Volume 5 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 359 of 928
TM 9-2350-277-20-5 REPLACE BATTERY DRAWER INSULATION AND HEAT EXCHANGER (M1064A3 ONLY) 0719 00 THIS WORK PACKAGE COVERS: Removal (page 0719 00-1). Cleaning (page 0719 00-2). Inspection and Repair (page 0719 00-2). Installation (page 0719 00-2). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0926 00, Item 65) M a t e r i a l s / P a r t s Sealing compound (WP 0928 00, Item 53) Sodium bicarbonate (WP 0928 00, Item 60) P e r s o n n e l R e q u i r e d Unit Mechanic R e f e r e n c e s See your -10 E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) Ramp lowered (see your -10) Batteries removed (WP 0349 00) Carrier cooling system drained (WP 0227 00) Coolant heater system drained (WP 0710 00) REMOVAL 1. Remove four nuts (1), washers (2), screws (3), and two brackets (4) from battery drawer (5). 2. Loosen four clamps (6). Remove two hoses (7) from heat exchanger (8) and two elbows (9). Remove clamps from hoses. 3. Remove battery drawer (WP 0353 00). 4. Remove heat exchanger (8) from battery drawer (5). 5. If damaged, remove top insulation sheet (10), bottom insulation sheet (11), rear insulation sheet (12), right insulation sheet (13), and left insulation sheet (14) from battery drawer shield (15). 0719 00-1