TM-9-2350-277-20-5 Unit Maintenance Manual Volume 5 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 215 of 928
TM 9-2350-277-20-5 REPLACE HEATER AIR INTAKE AND EXHAUST PIPES(M1064A3 ONLY) — Continued 0683 00 INSTALLATION 1. Install exhaust elbow (7), intake elbow (2), and two new gaskets (9) on carrier top deck. Secure with six screws (8). 2. Install exhaust pipe (5) on exhaust elbow (7). Secure with U-bolt (4), clamp (6), and two nuts (3). 3. Install intake pipe (1) on intake elbow (2). FOLLOW-THROUGH STEPS 1. Install heater assembly (WP 0704 00). 2. Connect battery ground strap (WP 0337 00). 3. Start heater. Check for intake and exhaust leaks. Turn heater off (see your -10). 4. Start engine (see your -10). 5. Raise and lock ramp (see your -10). 6. Stop engine (see your -10). END OF TASK 0683 00-3/4 blank