TM-9-2350-277-20-5 Unit Maintenance Manual Volume 5 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 177 of 928
TM 9-2350-277-20-5 INSTALLATION WARNING Lifting or moving objects in excess of 70 lbs (32 kg) could injure you. Make sure to get an assistant or use a lifting device to move generator set enclosure or other heavy objects. 1. Install enclosure (7). 2. Install four clamps (11), washers (10), and thumbscrews (9) in generator set enclosure (7). Secure with four new cotter pins (8). 3. Place enclosure (7) on bulkhead. Secure with four washers (6) and screws (5). TIGHTEN SCREWS TO 55-60 LB-FT (75-81 N m) TORQUE. 4. If needed, add washers (4) to remove play between enclosure (7) and hull lugs. 5. Align enclosure (7) with two hull lugs. Secure with two washers (4), washers (3), screws (2), and new locknuts (1). FOLLOW-THROUGH STEPS 1. Install generator set (see your -10). END OF TASK 0674 00-3/4 blank Change 2 REPLACE 4.2 KW GENERATOR SET ENCLOSURE (M577A3 AND M1068A3 ONLY) — Continued 0674 00