TM-9-2350-277-20-5 Unit Maintenance Manual Volume 5 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 123 of 928
TM 9-2350-277-20-5 REPLACE RAMP CONTROL VALVE HOSE AND ELBOW 0663 00 THIS WORK PACKAGE COVERS: Removal (page 0663 00-1). Installation (page 0663 00-3). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0926 00, Item 65) M a t e r i a l s / P a r t s Sealing Compound (WP 0928 00, Item 56) P e r s o n n e l R e q u i r e d Unit Mechanic R e f e r e n c e s See your -10 E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) Driver’s power plant access panel removed (see your -10) Hydraulic reservoir drained (WP 0671 00) REMOVAL WARNING Fire Resistant Hydraulic fluid (FRH) is toxic if absorbed through skin or ingested. Do not service hydraulic system when FRH is hot or pressurized. Wear gloves and avoid contact with skin. If FRH contacts skin, wash immediately with soap. If FRH gets into eyes, wash with lots of water for 15 minutes and get medical attention. If FRH is swallowed, get medical attention. NOTE There are two types of ramp control valves. One has an internal relief valve and the other has an external relief valve. Replacement of the ramp control valve hose is the same for both types. 1. Disconnect quick disconnect (1) at bottom of hose (2) from engine hose quick disconnect. 0663 00-1