TM-9-2350-277-20-4 Unit Maintenance Manual Volume 4 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 765 of 884
TM 9-2350-277-20-4 REPLACE REAR EXTERNAL STOWAGE FRAME (M1068A3 ONLY) 0626 00 THIS WORK PACKAGE COVERS: Removal (page 0626 00-1). Installation (page 0626 00-2). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0926 00, Item 65) M a t e r i a l s / P a r t s Cotter pin (2) Locknut (4) P e r s o n n e l R e q u i r e d Unit Mechanic Helper (H) R e f e r e n c e s See your -10 E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) REMOVAL 1. Loosen two straps (1) and remove stowed equipment from rear external stowage frame (2). 2. Remove two straps (1) from loops on hull rear plate and frame (2). 3. Remove two cotter pins (3), shouldered pins (4), four washers (5), and rear external stowage frame (2) from two mounts (6). Discard cotter pins. Have helper hold up one side. 4. Remove four screws (7), washers (8), and two mounts (6) from hull rear plate. 5. Remove four locknuts (9), screws (10), eight washers (11), and pad (12) from rear external stowage frame (2). Discard locknuts. 6. Remove six screws (13), washers (14), lockwashers (15), and pad (16) from rear external stowage frame (2). Discard lockwashers. 0626 00-1 Change 1