TM-9-2350-277-20-4 Unit Maintenance Manual Volume 4 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 75 of 884
0422 01--3 2. Remove non-mating end connectors (2) from each track shoe assembly (1). 3. Position track shoe assemblies (1) so that connecting track shoes are about 2 inches off the ground (about 20° angle). 4. Connect track shoe assemblies (1). a. Install two track pin alignment tools (4) over track shoe pins (5). b. Install two end connectors (2) on track shoe pins (5). Remove track pin alignment tool (4) before driving end connectors flush with pin ends. c. Drive end connectors (2) flush with pin ends and install bolts (3) on each end connector. 5. Repeat step 4 until a complete track has been connected in a line. 6. Unblock vehicle (see your-10). 7. (H): Drive vehicle backwards until track (4) positions on sprockets (5). Change 3 0422 01--3 REPLACE T150 TRACK — Continued 0422 01 8. (H): Drive vehicle backwards until track (4) is over idler wheels (6). TM 9-2350-277-20-4