TM-9-2350-277-20-4 Unit Maintenance Manual Volume 4 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 701 of 884
TM 9-2350-277-20-4 REPLACE VERTICAL AMMUNITION RACK (M1064A3 ONLY) 0608 00 THIS WORK PACKAGE COVERS: Removal (page 0608 00-1). Installation (page 0608 00-3). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0926 00, Item 65) P e r s o n n e l R e q u i r e d Unit Mechanic R e f e r e n c e s See your -10 E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) Ramp lowered (see your -10) REMOVAL NOTE Vertical ammunition racks in the M1064A3 carrier are replaced the same way. Racks differ in size and capacity. 1. Remove twelve screws (1), washers (2), and rack (3) from side hull and top plate. 2. Remove eleven screws (4), washers (5), and rack (6) from side hull and sponson. 3. If damaged, remove ten straps (7) from loops (8) on left side hull. 4. If damaged, remove two straps (9) from loops (10) on sponson side plate. 5. If damaged, remove two decals (11) from sponson side plate. 6. If damaged, remove decal (12) from sponson side plate. 0608 00-1