TM-9-2350-277-20-4 Unit Maintenance Manual Volume 4 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 673 of 884
TM 9-2350-277-20-4 REPLACE RIGHT REARWARD TABLE (M577A3 ONLY) 0582 00 THIS WORK PACKAGE COVERS: Removal (page 0582 00-1). Installation (page 0582 00-2). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0926 00, Item 65) M a t e r i a l s / P a r t s Locknut (12) Locknut (2) Lockwasher (8) P e r s o n n e l R e q u i r e d Unit Mechanic R e f e r e n c e s See your -10 E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) Ramp lowered (see your -10) REMOVAL 1. Remove sixteen screws (1), eight spacers (2), and two drop leaves (3) from table top (4). 2. Remove eight screws (5), lockwashers (6), and four catches (7) from two drop leaves (3). Discard lockwashers. 3. Remove three nuts (8), washers (9), screws (10), and table top (4) from hull. NOTE Shims (flat washers – two maximum) may be required to obtain clearance between screw and support bracket. 4. Remove two locknuts (11), washers (12), screws (13), four table supports (14), and shims (if installed) from hull. Discard locknuts. 5. Remove sixteen screws (15), eight spacers (16), hinges (17), and four supports (14) from table top (4). 6. Remove twelve locknuts (18), washers (19), screws (20), and four braces (21) from supports (14). Discard locknuts. 0582 00-1