TM-9-2350-277-20-4 Unit Maintenance Manual Volume 4 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 647 of 884
TM 9-2350-277-20-4 REPLACE OIL CAN BRACKET 0574 00 THIS WORK PACKAGE COVERS: Removal (page 0574 00-1). Installation (page 0574 00-1). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0926 00, Item 65) Torque Wrench (WP 0926 00, Item 84) P e r s o n n e l R e q u i r e d Unit Mechanic R e f e r e n c e s See your -10 E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) Trim vane lowered (see your -10) Power plant access door open (see your -10) REMOVAL 1. Remove two screws (1), washers (2), and oil can bracket (3) from power plant compartment. INSTALLATION 1. Align oil can bracket (3) with bulkhead in power plant compartment. Secure with two washers (2) and screws (1). TIGHTEN SCREWS TO 22-24 LB-FT (30-33 N m) TORQUE. FOLLOW-THROUGH STEPS 1. Close power plant access door (see your -10). 2. Raise trim vane (see your -10). END OF TASK 0574 00-1/2 blank