TM-9-2350-277-20-4 Unit Maintenance Manual Volume 4 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 62 of 884
INSTALLATION 1. Place drive sprocket wheel assembly (1) on final drive (3). Secure with 10 new self-locking screws (2). TIGHTEN SCREWS TO 170-190 LB-FT (231-258 N.m) TORQUE. 2. Place track on drive sprocket wheel assemblies (1). TM 9-2350-277-20-4 REPLACE T130 DRIVE SPROCKET WHEEL ASSEMBLY — Continued 0420 00 Change 3 FOLLOW-THROUGH STEPS 1. Connect track and adjust tension (see your -10). 2. Install track cover (WP 0438 00). 3. Unblock carrier (see your -10). 4. Road test carrier to check that drive sprocket wheel assembly is installed right (WP 0155 00). END OF TASK 0420 00-2