TM-9-2350-277-20-4 Unit Maintenance Manual Volume 4 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 532 of 884
TM 9-2350-277-20-4 REPLACE FLOOR PLATES (M1059A3 ONLY) — Continued 0542 00 8. If necessary, remove two pads (12), four pads (13), and two pads (14)(15) from hull crossmembers by scraping. INSTALLATION 1. If pads (1) through (5), rubber strips (6), or seals (7) were removed, apply light coat of adhesive to all crossmember mating surfaces. Allow surfaces to become sticky. Install pads, rubber strips, and seals on crossmembers and press surfaces firmly together. 2. Place two front floor plates (8) and (9) on hull crossmembers. 3. Place two rear floor plates (10) and (11) on hull crossmembers. 4. Install two washers (12) and screws (13) on front floor plates (8) and (9). 0542 00-2