TM-9-2350-277-20-4 Unit Maintenance Manual Volume 4 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 531 of 884
TM 9-2350-277-20-4 REPLACE FLOOR PLATES (M1059A3 ONLY) 0542 00 THIS WORK PACKAGE COVERS: Removal (page 0542 00-1). Installation (page 0542 00-2). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0926 00, Item 65) M a t e r i a l s / P a r t s Adhesive (WP 0928 00, Item 4) P e r s o n n e l R e q u i r e d Unit Mechanic R e f e r e n c e s See your -10 E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) Personnel floor heater duct removed (WP 0706 00) Seats folded in stowed position (see your -10) Ramp lowered (see your -10) REMOVAL 1. Remove 12 screws (1) and lined washers (2) securing floor plates to hull crossmembers. 2. Remove two screws (3) and washers (4) securing floor plates to hull crossmembers. 3. Remove two rear floor plates (5) and (6) from hull crossmembers. 4. Remove two front floor plates (7) and (8) from hull crossmembers. 5. If necessary, remove two non-metallic seals (9) from hull crossmembers by scraping. 6. If necessary, remove two rubber strips (10) from hull crossmembers by scraping. 7. If necessary, remove eight pads (11) from hull crossmembers by scraping. 0542 00-1