TM-9-2350-277-20-4 Unit Maintenance Manual Volume 4 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 469 of 884
TM 9-2350-277-20-4 REPLACE RAMP LINKAGE (M113A3 AND M1059A3 ONLY) 0526 00 THIS WORK PACKAGE COVERS: Removal (page 0526 00-1). Installation (page 0526 00-3). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0926 00, Item 65) Torque Wrench (WP 0926 00, Item 85) M a t e r i a l s / P a r t s Cotter pin (3) Key washer Square washer P e r s o n n e l R e q u i r e d Unit Mechanic R e f e r e n c e s See your -10 E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) Ramp lowered (see your -10) REMOVAL NOTE Some carriers are equipped with flat shaped ramp lock rods while other carriers are equipped with hex shaped ramp lock rods. They are removed and installed differently, as described below. NOTE Removaland installation of ramp linkage is the same for both sides of carrier. Text is for one side only. 1. Remove cotter pin (1), headed pin (2), and connecting link (3) from arm (4). Discard cotter pin. 2. Remove cotter pin (5), headed pin (6), and connecting link (3) from clevis (7). Discard cotter pin. 0526 00-1 Change 2