TM-9-2350-277-20-4 Unit Maintenance Manual Volume 4 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 431 of 884
TM 9-2350-277-20-4 REPLACE RAMP DOOR HANDLES AND SHAFT 0519 00 THIS WORK PACKAGE COVERS: Removal (page 0519 00-1). Installation (page 0519 00-2). Adjustment (page 0519 00-3). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0926 00, Item 65) M a t e r i a l s / P a r t s Locknut Lockwasher (2) Preformed packing P e r s o n n e l R e q u i r e d Unit Mechanic R e f e r e n c e s See your -10 E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) Ramp raised and locked (see your -10) REMOVAL 1. Remove pin (1), two washers (2), and door lock (3) from mount on ramp. 2. Remove locknut (4), inside handle (5), and inside washer(s) (6), and spacer (7) from shaft (8). Discard locknut. 3. Remove key (9) from shaft (8). 4. Remove two screws (10), lockwashers (11), washers (12), and outside handle (13) from shaft (8). Discard lockwashers. 5. Remove shaft (8), washer(s) (14), and preformed packing (15) from ramp (16). Discard packing. 0519 00-1