TM-9-2350-277-20-4 Unit Maintenance Manual Volume 4 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 422 of 884
TM 9-2350-277-20-4 REPLACE RAMP SEAL — Continued 0514 00 INSTALLATION NOTE Trim seal to fit. 1. Place lower seal (4) on rear bulkhead. Bend three retaining strips (3) on seal to secure in place. 2. Place upper seal (2) on rear bulkhead. Bend retaining strip (1) down on seal to secure in place. FOLLOW-THROUGH STEPS 1. Start engine (see your -10). 2. Perform ramp seal chalk test (WP 0521 00). 3. Raise and lock ramp (see your -10). 4. Stop engine (see your -10). END OF TASK 0514 00-2