TM-9-2350-277-20-4 Unit Maintenance Manual Volume 4 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 391 of 884
TM 9-2350-277-20-4 REPLACE LEFT SIDE SPALL LINERS (M113A3 ONLY) — Continued 0505 00 NOTE Install short track on rear of vehicle first. When using torque wrench with adapter, torque value mustbe corrected. Procedure for converting torque value is on (WP 0155 00). 2. Install two lower rear tracks (9) and (10) and middle track (8) on hull. Secure with 12 screws (12) and washers (13). TIGHTEN SCREWS TO 32-34 LB-FT (43-46 N•m) TORQUE. 3. Install two lower rear tracks (9) and (10) and middle lower track (8) on support (11). Secure with 12 screws (6) and washers (7). TIGHTEN SCREWS TO 32-34 LB-FT (43-46 N•m) TORQUE. NOTE If stop assemblies were removed in (Step 7), do (Step 4) and (Step 5). 4. Slide stop assembly (5) onto outside track of upper rear track (3). Position stop 4-3/4 to 5-1/4 inches (12.1 to 14.6 cm) from end of track. Secure stop with screw (4). 5. Slide other stop assembly (5) onto inside track of upper rear track (3). Position stop 3/8 to 7/16 inch (0.95 to 1.11 cm) from end of track. Secure stop with screw (4). 6. Install upper rear track (3) on hull. Secure with 24 screws (1) and washers (2). TIGHTEN SCREWS TO 32-34 LB-FT (43-46 N•m) TORQUE. Have helper assist. 0505 00-5