TM-9-2350-277-20-4 Unit Maintenance Manual Volume 4 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 31 of 884
TM 9-2350-277-20-4 REPLACE TORSION BAR ANCHOR 0414 00 THIS WORK PACKAGE COVERS: Removal (page 0414 00-1). Installation (page 0414 00-3). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0926 00, Item 65) Socket Wrench Set (Required for M1064A3 5th anchor only) (WP 0926 00, Item 73) Torque Wrench (Required for M1064A3 5th anchor only) (WP 0926 00, Item 86) M a t e r i a l s / P a r t s Cotter pin (2) Preformed packing (Required for 3rd, 4th, & 5th anchors only) P e r s o n n e l R e q u i r e d Unit Mechanic R e f e r e n c e s See your -10 E q u i p m e n t C o n d i t i o n Carrier on level surface Engine stopped (see your -10) Carrier blocked (see your -10) Road wheel removed (T130) (WP 0426 00) Torsion bar removed (WP 0413 00) Power plant removed (Required for 2nd right anchor only) (WP 0156 00) REMOVAL NOTE The 5th anchor on the M1064A3 carrier is secured with screws instead of pins because it is located under the welded floor plates next to the mortar turntable. NOTE On all carriers, preformed packings are located behind the 3rd, 4th, and 5th anchors only. 0414 00-1 Road wheel removed (T150) (WP 0426 01) Change 3