TM-9-2350-277-20-4 Unit Maintenance Manual Volume 4 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 295 of 884
TM 9-2350-277-20-4 REPLACE CARGO HATCH INTERIOR LATCH (M113A3 AND M1059A3 ONLY) — Continued 0475 00 ADJUSTMENT NOTE Cargo hatch cover should fit tightly and evenly along all four sides. 1. Remove or add washers (1) between two brackets (2) and the cargo hatch cover (3), as needed, to establish a proper seal and correct latch engagement. 2. If cargo hatch cover does not seal correctly, remove required number of washers (1), equally, from both brackets(2) to tighten seal. 3. If cargo hatch cover (3) is too tight to latch correctly, add required number of washers(1), equally, to both brackets (2) to obtain proper latch engagement. 4. Position bracket (2) so that latch (4) engages striker (5) within 3/8 to 5/8 inch (10-16 mm). 5. TIGHTEN EIGHT SCREWS (6) TO 22-24 LB-FT (30-37 N•m) TORQUE. END OF TASK 0475 00-5/6 blank Change 2