TM-9-2350-277-20-4 Unit Maintenance Manual Volume 4 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 239 of 884
TM 9-2350-277-20-4 REPLACE TRIM VANE RELEASE — Continued 0462 00 2. Manually move upper edge of trim vane (1) forward and rearward to check trim vane for excess movement in stowed position. If trim vane moves too much or is not secure in stowed position, go to Step 3. 3. Remove cotter pin (2) and pin (3) from clevis rod end (4) and bracket (5). Loosen nut (6) and turn clevis rod end to change length of extension linkage. Tighten nut. Retain cotter pin until adjustments are complete. 4. Install clevis rod end (4), pin (3), and retained cotter pin (2) on bracket (5). Check that extension linkage provides overcenter lock in retracted position. 5. Check trim vane (1) for excess movement in stowed position. If trim vane moves too much or is not secure in stowed position, go to Step 6. 0462 00-3 Change 3