TM-9-2350-277-20-4 Unit Maintenance Manual Volume 4 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 235 of 884
TM 9-2350-277-20-4 REPAIR TRIM VANE CONTROL LINKAGE — Continued 0461 00 ASSEMBLY 1. Install eyebolt (11) and catch (8) on extension (14). Secure with screw (13) and new locknut (12). 2. Install nut (10), bracket (9), and clevis (3) on eyebolt (11). 3. Install spring (7) on catch (8) and bracket (9). 4. Install pivot bracket (4) on hull. Secure with two screws (5) and washers (6). TIGHTEN SCREWS TO 32-34 FT-LB (43-46 N.m) TORQUE. 5. Position trim vane control linkage on carrier with clevis (3) aligned with pivot bracket (4). 6. Install pin (2) in clevis (3) and pivot bracket (4). Secure with new cotter pin (1). 7. Adjust clevis (3) to provide overcenter lock in retracted position. 8. Adjust trim vane quick release to provide overcenter lock in retracted position. END OF TASK 0461 00-3/4 blank Change 3