TM-9-2350-277-20-4 Unit Maintenance Manual Volume 4 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 193 of 884
TM 9-2350-277-20-4 REPLACE LIFTING EYE 0444 00 THIS WORK PACKAGE COVERS: Removal (page 0444 00-1). Installation (page 0444 00-1). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0926 00, Item 65) Socket Adapter (WP 0926 00, Item 1) Torque Wrench (WP 0926 00, Item 86) P e r s o n n e l R e q u i r e d Unit Mechanic R e f e r e n c e s See your -10 E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) REMOVAL NOTE Right front lifting eye has one screw (2) 2-3/4 inches (7 cm) long and three screws 2-1/2 inches (6 cm) long. All other lifting eyes use four screws 2-1/2 inches (6 cm) long. 1. Remove four screws (1) or screws (1)(2) that secure lifting eye (3) to hull. INSTALLATION 1. Install lifting eye (3) on hull. Secure with four screws (1) or screws (1)(2). 2. TIGHTEN SCREWS (1)(2) TO 175-200 LB-FT (237-271 N m) TORQUE. END OF TASK 0444 00-1/2 blank