TM-9-2350-277-20-4 Unit Maintenance Manual Volume 4 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 180 of 884
TM 9-2350-277-20-4 REPAIR/REPLACE POWER PLANT REAR ACCESS PANELS — Continued 0439 00 8. Remove four locknuts (20), screws (21), and support (22) from hull. Discard locknuts. INSTALLATION 1. Install support (1) on hull. Secure with four screws (2) and new locknuts (3). 2. Install cover (4) on hull. Secure with two screws (5) and new locknuts (6). 3. Install seven spacers (7) on hull. Secure with seven screws (8). 4. Install seven clamps (9), washers (10), T-bolts (11), and new cotter pins (12) in hull. NOTE Do Step 5 for M901A3, M1068A3, and M1064A3 only. M901A3 and M1068A3 have one snap-fastener stud and M1064A3 has two snap-fastener studs. 5. If removed, install snap-fastener stud (13), two washers (14), and new locknut (15) on upper panel (16). 0439 00-2