TM-9-2350-277-20-4 Unit Maintenance Manual Volume 4 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 122 of 884
TM 9-2350-277-20-4 REPLACE PUSH-PULL CONTROL ASSEMBLY, BRACKET, LINKS, AND PINS (CABLE-ACTIVATED LOCK) — Continued 0429 00 NOTE Route push-pull control assembly with one end at transmission controller and other end at steering wheel housing. 9. Install push-pull control assembly (7) in clamp (8) and secure to hull with screw (9) and new lockwasher (10). 10. Route push-pull control assembly (7) to transmission controller (11). 11. Remove nut (12) from end of push-pull control assembly (7). Place end of push-pull control assembly (7) through hole in bracket (13). Install new lockwasher (14) and nut (12). 12. Connect end of push-pull control assembly (7) to bracket (15) with pin (16), two washers (17) and new cotter pin (18). 0429 00-10