TM-9-2350-277-20-3 Unit Maintenance Manual Volume 3 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 727 of 962
TM 9-2350-277-20-3 REPLACE TOW START CONTROL ASSEMBLY AND BEARING — Continued 0391 00 INSTALLATION 1. Route cable assembly (12) from driver’s compartment through mounting hole in bulkhead. 2. Install jam nut (10) and washer (11) on threaded conduit end of control cable assembly (12). Tighten jam nut. 3. Install cable bracket (6) and bearing (9) on top of transmission. Secure with two screws (7) and washers (8). TIGHTEN SCREWS TO 18-20 LB-FT (24-27 N m) TORQUE. 4. Place two cable straps (1) on conduit end of cable assembly (5). Install cable straps with cable assembly on bracket (6). Secure with two screws (2), washers (3), and new locknuts (4). 0391 00-5 Change 1