Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2350-277-20-3 Unit Maintenance Manual Volume 3 M113A3 M577A3 M1064A3 M1068A3 M58 Download

Page 712 of 962

TM 9-2350-277-20-3 REPLACE TRANSMISSION RANGE CONTROLLER/BRACKET (USED WITH CABLE-ACTIVATED STEERING LOCK) — Continued 0387 00 2. Remove nut (6) and lockwasher (7) from end of push-pull assembly (4), and remove push-pull assembly from bracket (8). Reinstall nut (6) on push-pull assembly (4) for future use. Discard lockwasher. 3. Remove four screws (9), lockwashers (10), washers (11), and controller (12) from four mounts (13). Discard lockwashers. 4. Remove four screws (14), lockwashers (15), washers (16), and mounts (13) from bracket (17). Discard lockwashers. NOTE Install covers on disconnected electrical cable connectors and components during maintenance. Use tape, cloth, cardboard, or any appropriate material to prevent damage to components. 5. Disconnect wiring harness (18) from controller (12). 6. Remove three screws (19), six washers (20), three locknuts (21), and bracket (17) from bulkhead. Discard locknuts. 0387 00-2