TM-9-2350-277-20-3 Unit Maintenance Manual Volume 3 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 693 of 962
TM 9-2350-277-20-3 REPAIR WIRING HARNESS — Continued 0382 00 3. Install terminal connector on harness lead. a. If nipple (10) was removed from lead (11), strip insulation from lead to uncover just enough wire to fill barrel (12) of terminal (13). Slide nipple over lead. b. If insulated sleeving (14) was removed from lead (11), slide new insulated sleeving on lead. Strip insulation from lead to same length as barrel (12) on terminal (13). c. If lead (11) is large diameter, fill barrel (12) on terminal (13) with solder and flux. Insert lead into melted solder in terminal barrel. Allow to cool. d. If lead (11) is small diameter, position terminal (13) on lead. Crimp terminal on lead. 0382 00-5