TM-9-2350-277-20-3 Unit Maintenance Manual Volume 3 M113A3 M577A3 M1064A3 M1068A3 M58 Download
Page 672 of 962
TM 9-2350-277-20-3 REPLACE RADIAC WIRE HARNESS (M113A3, M577A3, AND M1068A3 ONLY) — Continued 0376 00 INSTALLATION 1. Tie cord left in cross beam (5) to end of RADIAC harness (2). 2. Pull cord and harness (2) through cross beam. Remove cord. 3. Install electrical connectors (4) on harness (2) (WP 0382 00). 4. Place harness (2) on four cradles (3) and secure with four clips (1). FOLLOW-THROUGH STEPS 1. Connect battery ground strap (WP 0337 00) or (WP 0338 00). 2. Start engine (see your -10). 3. Raise and lock ramp (see your -10). 4. Stop engine (see your -10). END OF TASK 0376 00-2